GON Magazine | GON Classifieds

Go Back   Georgia Outdoor News Forum > Archery and Primitive Skills > DIY Archery


Reply
 
Thread Tools Display Modes
  #1  
Old 09-07-2016, 10:20 AM
BuddyG BuddyG is offline
Banned
Join Date: Aug 2016
Location: Dalton, Georgia
iTrader: (0) Check/Add Feedback
Default broadheads grouping fine but 4 inches left of FP

should i just move my rest to the right like the forums all say, or just move the sight and say heck with it? shooting Muzzy, bad to the bone!!!!!!!!!!!!!!

i think im gonna move the rest first, if they come together, then ill mess with the sight to polish it out. Thoughts? just wanting a second opinion or two before i got to tinkerin!
Reply With Quote
  #2  
Old 09-07-2016, 10:51 AM
Kris87's Avatar
Kris87 Kris87 is offline
Moderator
Join Date: Nov 2009
Location: Watkinsville
iTrader: (0) Check/Add Feedback
Default

Could be a lot of things, but if they're grouping left, then you probably have a right tear through paper. I'd move the rest to the left. The old Easton guide is incorrect for release shooters on broadhead tuning. I'd have to know a lot more about the bow, centershot, arrows, etc...before I'd recommend what to do.
__________________
Backyard Bambi Bomber
Reply With Quote
  #3  
Old 09-07-2016, 10:52 PM
base3448's Avatar
base3448 base3448 is offline
Join Date: Aug 2006
Location: Ga
iTrader: (0) Check/Add Feedback
Default

Put a piece of electrical tape down the middle of ur target and try to hit the tape anywhere. Ur only looking for left or right issues. Start at 10 yards. Shoot and first move ur sight if needed chase ur arrow or move the pin towards ur arrow. With same pin Go to 20 yards and shoot again if hitting left or right move ur rest towards the tape. Go back to 10 and do it all again 20 then 30.

Hope it helps. Go to YouTube and look up walk back tuning or French tuning I think I said it correct. It does not take long at all
Reply With Quote
  #4  
Old 09-14-2016, 09:31 PM
mark-7mag's Avatar
mark-7mag mark-7mag is online now
Join Date: Jan 2008
Location: GA
iTrader: (1) Check/Add Feedback
Default

Quote:
Originally Posted by base3448 View Post
Put a piece of electrical tape down the middle of ur target and try to hit the tape anywhere. Ur only looking for left or right issues. Start at 10 yards. Shoot and first move ur sight if needed chase ur arrow or move the pin towards ur arrow. With same pin Go to 20 yards and shoot again if hitting left or right move ur rest towards the tape. Go back to 10 and do it all again 20 then 30.

Hope it helps. Go to YouTube and look up walk back tuning or French tuning I think I said it correct. It does not take long at all
This is good advice
__________________
"If Georgia Tech were playing the Russians, I'd root for the team in red."
Lewis Grizzard
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -4. The time now is 11:26 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004 Georgia Outdoor News, Inc.Ad Management by RedTyger