deast1988
Senior Member
I have been having a tough time to get them to fly through my set up. My bow is 55lbs@28ins. Centaur longbow, my arrows are 29.5in long goldtip 55-75 with a 100gr brass insert. I use the arrow as draw indicator to help me know I'm drawing it back to where it should be.
Screw in Treesharks come down the arrow shaft an inch from insert. And I'm getting very erratic arrow flight. Ive tried 33-55 no brass insert with brass insert same arrow length. Same flight results,
Brings me to my question I took an abowyer titanium insert these things are tiny and a Glue in centaur battle axe even bigger then the Treeshark. I paired the two An screwed in for some test shots just checking arrow flight. So far the big battle axe is shooting true as can be with no erratic flight.
My question is, could the screw in treesharks with the 1 in over the shaft overlay be doing something to the spine of the arrow.
I'm thinking order some glue on model tree sharks and do the inserts myself if this gets me the arrow flight I'm after. Currently with the screw in model tree sharks my arrows won't hit even close to the same spot you see major tail kicks swirls dips.
I tested the battle Axe yesterday out to 25yds to make sure the arrow isn't doing anything wierd an all appears well.
Screw in Treesharks come down the arrow shaft an inch from insert. And I'm getting very erratic arrow flight. Ive tried 33-55 no brass insert with brass insert same arrow length. Same flight results,
Brings me to my question I took an abowyer titanium insert these things are tiny and a Glue in centaur battle axe even bigger then the Treeshark. I paired the two An screwed in for some test shots just checking arrow flight. So far the big battle axe is shooting true as can be with no erratic flight.
My question is, could the screw in treesharks with the 1 in over the shaft overlay be doing something to the spine of the arrow.
I'm thinking order some glue on model tree sharks and do the inserts myself if this gets me the arrow flight I'm after. Currently with the screw in model tree sharks my arrows won't hit even close to the same spot you see major tail kicks swirls dips.
I tested the battle Axe yesterday out to 25yds to make sure the arrow isn't doing anything wierd an all appears well.