BAMA HUNTER
Senior Member
Just wondering if there is any danger in taking the plug out and just getting the powder out and pushing the bullet out that way..without shooting it?
Thanks.
Thanks.
no problem. just dont forget to clean the gun VERY well because if its been loaded with pellets this long it probably has some corrosion at the breech
Just wondering if there is any danger in taking the plug out and just getting the powder out and pushing the bullet out that way..without shooting it?
Thanks.
That's how I do mine. Don't forget the breech plug grease when you put the plug back in!
If u said whether it's the inline modern type or not I missed it. If it is u'd be ok to take the breechplug out and pour the powder out the back unless it is pellets. If it's pellets U can take the ramrod and run it in from the breach toward the muzzle. If it is not inline, it's a whole different ball game. I saw a CO2 cylinder that had a adapter to screw into the hole where ur nipple is screwed in. I've nevr used this as I always just shot out any load I did not want in the gun for whatever reason.Just wondering if there is any danger in taking the plug out and just getting the powder out and pushing the bullet out that way..without shooting it?
Thanks.