GON Magazine | GON Marketplace

Go Back   Georgia Outdoor News Forum > Firearms > Firearms, Reloading and Scopes

Reply
 
Thread Tools Display Modes
  #1  
Old 07-31-2008, 08:14 PM
bubdog's Avatar
bubdog bubdog is offline
 
Join Date: Oct 2005
Location: Marietta
iTrader: (5) Check/Add Feedback
Default Muzzleloader Barrel Break In

Can someone please tell me the proper procedure to break in a muzzleloader barrel, or tell me a website that lists the proper way to break one in. Thanks in advance.
Reply With Quote
  #2  
Old 07-31-2008, 08:51 PM
HandgunHTR's Avatar
HandgunHTR HandgunHTR is offline
Steelringin' Mod
 
Join Date: Dec 2007
Location: Dallas, GA
iTrader: (44) Check/Add Feedback
Default

There really isn't a "break-in" procedure for muzzleloaders, but you do need to get the barrel seasoned.

Just shoot, swab with a wet patch, dry with dry patches, run a patch with T/C Bore Butter down, load and shoot again. It will take a couple of range sessions to get a proper season.

Do not use any solvents for smokeless powder in your barrel and do not use a brass brush except for really heavy fouling (which you shouldn't have). Doing these things will remove the seasoning.
Reply With Quote
  #3  
Old 07-31-2008, 09:07 PM
Nicodemus's Avatar
Nicodemus Nicodemus is offline
Freelance Moderator
 
Join Date: Apr 2005
Location: God`s Country
iTrader: (10) Check/Add Feedback
Default

I just swabbed out the new barrel real good, and commenced to shootin`. Course, mine are traditional rifles.
Reply With Quote
  #4  
Old 08-02-2008, 05:14 PM
Cknerr's Avatar
Cknerr Cknerr is offline
 
Join Date: Jan 2008
Location: Acworth, Ga.
iTrader: (1) Check/Add Feedback
Default Nicodemus

has it about right for the traditional style of muzzle loader.

Modern guns need some burnishing and pit filling. Smoke poles work entirely different when looking at bullet surface and barrel interface. Lead and iron is a whole lot different then copper and steel. There is no burnishing and no pit filling with the lead.

Now if you are using sabots and pyrodex type powder.....weeelllllll, now you have a modern rifle with modern bullet speeds, modern copper (or something close to it) rubbing on modern steel, and modern propellant. Things are a lot different. That version will require shooting in. About like you would with a modern rifle.

Not meaning to sound too much like a smart alec - but it is true about how you treat your barrel. Lead balls with cloth patches fired down barrels with very slow twist barrels (66 to 72)are really different then hard copper coated bullets with pretty skirts fired down barrels with fast twist rifling (26 - 36).

best of luck,
__________________
Chris K'nerr
Head wood chopper
Reply With Quote
  #5  
Old 08-02-2008, 05:39 PM
SmokyMtnSmoke's Avatar
SmokyMtnSmoke SmokyMtnSmoke is offline
 
Join Date: Oct 2005
Location: Cartersville, Ga
iTrader: (58) Check/Add Feedback
Default

With modern steel that muzzle loader barrels are made of today, 'seasoning' is pretty much a misnomer.

Read this and make up your own mind.


Quote:
Once in a while, the topic of "seasoning a barrel" comes up. Anyone with a basic understanding of modern steels realizes that they are non-porous compared to a cast-iron skillet, and they cannot be seasoned one way or another. One can long for the return of primitive metallurgy and the return of Damascus barrels with porous welds on twisted steel, but I'm not one of them. Your local Ryerson's can educate you on the properties of modern steels, if you have any real interest.

The subject of corrosivity comes up from time to time, and as far as I'm concerned all of these propellants are corrosive, though markedly less so than blackpowder or Pyrodex. Sulfur salts have long been the main culprit.

The ascorbic acid based propellants aggressively attack and corrode brass. My impression is that they are somewhat less corrosive than Triple Se7en to barrels, but I'm not willing to intentionally ruin any rifle barrels to find out. The gluconic acid salts and alkali metal nitrobenzoate salt based Triple Se7en, with some carbon added to give it a little color, remains the best available solution for today's modern muzzleloaders that cannot use superior, non-corrosive, smokeless propellants.
That quote is from this article...
http://www.chuckhawks.com/black_powd...te_roundup.htm
__________________
"Everything is on it's way to somewhere else. Everything!"
Reply With Quote
  #6  
Old 08-02-2008, 06:46 PM
Jim Thompson's Avatar
Jim Thompson Jim Thompson is offline
Retired Admin
 
Join Date: Sep 2004
Location: New Haven, IL by way of GA
iTrader: (15) Check/Add Feedback
Default

Quote:
Originally Posted by SmokyMtnSmoke View Post
With modern steel that muzzle loader barrels are made of today, 'seasoning' is pretty much a misnomer.

Read this and make up your own mind.




That quote is from this article...
http://www.chuckhawks.com/black_powd...te_roundup.htm

yep, no need for actual "seasoning" of a barrel. shoot n clean n shoot n clean.

I prefer to run a wet patch and a dry patch between shots
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -4. The time now is 03:44 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2004 Georgia Outdoor News, Inc.Ad Management by RedTyger