GON Magazine | GON Marketplace

Go Back   Georgia Outdoor News Forum > Archery and Primitive Skills > Primitive Skills

Reply
 
Thread Tools Display Modes
  #1  
Old 06-28-2010, 04:06 PM
HighCotton's Avatar
HighCotton HighCotton is offline
 
Join Date: Nov 2005
Location: South GA (God's country)
iTrader: (0) Check/Add Feedback
Default Cleaning a Turtle Shell

I found a large turtle shell in the yard last week. Just the shell. I guess the turtle had died for some reason and the body had already decayed and been eaten out I guess my ants or something else.

The shell is in good shape top and bottom. The inside of the shell still contains some remnants of the body flesh, blood stains, etc.

I'd like to clean it up and keep it. Any suggestions on how to do this? I thought about boling it but I don't want to mess up the shell in any way.
__________________
If doing better is possible, then good is not good enough.
Reply With Quote
  #2  
Old 06-28-2010, 04:18 PM
Al33's Avatar
Al33 Al33 is offline
 
Join Date: Sep 2004
Location: Marietta
iTrader: (21) Check/Add Feedback
Default

Most turtle/terrapin shells have a skin on them that comes off after being exposed to the elements awhile. If yours still has it's skin and you want to keep the skin on it do not put it in water or try to wet wash it. Put it in the shade somewhere a critter is not likely to get it and let the ants finish cleaning out the inside. Once it has cured the skin scales will likely either fall off or come off very easily. You will then need to glue them back on. The hard shell will have a pattern showing you how to put them back on, kind of like a gig-saw puzzle. Once you have them glued back on coat it with a heavy coat of clear spray polyurethane. That's all there is to it.

Note: If the skin is intact you may want to go ahead and spray it with the polyurethane now versus after it has cured out. This might save you the trouble of having to glue them back on later. Be sure to spray both top and bottom.

Here is a gopher-tortoise shell I did a few years ago.
Attached Images
 
__________________
Al

Last edited by Al33; 06-28-2010 at 04:29 PM.
Reply With Quote
  #3  
Old 06-28-2010, 04:50 PM
HighCotton's Avatar
HighCotton HighCotton is offline
 
Join Date: Nov 2005
Location: South GA (God's country)
iTrader: (0) Check/Add Feedback
Default

There were a couple of real thin, almost paper-like things on the shell that have already come off. I discarded them. Is this the "skin"?

So, there's really no way to clean up the inside? I can put it on an ant bed, that's no prolem.
__________________
If doing better is possible, then good is not good enough.
Reply With Quote
  #4  
Old 06-28-2010, 08:13 PM
Al33's Avatar
Al33 Al33 is offline
 
Join Date: Sep 2004
Location: Marietta
iTrader: (21) Check/Add Feedback
Default

Quote:
Originally Posted by HighCotton View Post
There were a couple of real thin, almost paper-like things on the shell that have already come off. I discarded them. Is this the "skin"?

So, there's really no way to clean up the inside? I can put it on an ant bed, that's no prolem.
Sounds like the skin has already come off. If the shell is white or bone colored, it has.

Sure, I'm sure you can clean it out but why mess with the stinky stuff when the itty bitty critters will do it for you?
__________________
Al
Reply With Quote
  #5  
Old 06-28-2010, 08:39 PM
Son's Avatar
Son Son is offline
 
Join Date: Sep 2004
Location: SW Ga.,Seminole, Miller, Early co's.
iTrader: (0) Check/Add Feedback
Default

Ants will finish the cleaning job. Clear coat to keep it in good shape after they clean it.
__________________
Remember the "Fighting I"
USS INTREPID CVS-11
Reply With Quote
  #6  
Old 06-29-2010, 08:59 AM
HighCotton's Avatar
HighCotton HighCotton is offline
 
Join Date: Nov 2005
Location: South GA (God's country)
iTrader: (0) Check/Add Feedback
Default

Quote:
Originally Posted by Al33 View Post
Sounds like the skin has already come off. If the shell is white or bone colored, it has.

Sure, I'm sure you can clean it out but why mess with the stinky stuff when the itty bitty critters will do it for you?
Shell is still the original color.

Everything is out of the inside except for just a little stuff. I think I'll try just getting down in there with a tooth brush and some hot water and see if I can get the rest of it... but an earlier post said keep the shell out of water.
__________________
If doing better is possible, then good is not good enough.
Reply With Quote
  #7  
Old 06-29-2010, 10:38 AM
TNGIRL's Avatar
TNGIRL TNGIRL is offline
 
Join Date: Aug 2009
Location: Buck's Pocket, Cleveland,TN and where ever my Ford Ranger takes me now.
iTrader: (3) Check/Add Feedback
Default

I hate you pitched the turtle scales, they could go back on with some superglue gel.
As for the remaining flesh inside, the ants will take care of it, or you can take a sharp implement and scrape it off. Much like the "fleshing" out of a hide, only smaller scale. I always wash my turtle shells no matter what shape they are in. Soap and water and a medium stiff brush, if the scales slip off, save and glue back once it's dry, and before you apply the poly coats. Then I just put the shell on a papertowel to dry completely. Once good and dry, if that's all you want it to look like, get some polyurathane and I usually brush it on so I can get in the nooks and crannies underneath the edges. If you find a bleached out shell, without scales, you can paint it up right purty, let dry then poly coat it. I always put 2 to 4 coats of poly on it. It can get real hard then and pretty durable as well. I have also had shells that was older and dried out to have the "bones" seperate like the puzzle Al was talking about, I saved it all, then used superglue gel and put the puzzle back together, once dried, then polyed it well. Sometimes, I still run some of the superglue gel along the inside of the shells seams just for strength. Turtle shells are my favorite thing to work with!!!! So enjoy yours and post up a picture when you are finished OK?

Here's a large shell I found, on a ladies only hunt, got it home, it dried out and fell totally apart, and had no scales left on it. I painted it up and pieced it back together with superglue gel etc. etc. and here's my possibles bag!!!

This is the underside of the shell. I took it and after trimming edges, reconnected it with sinew to make a hinged top and added the leather bag inside and the fringe!!!!

Oh yeh, Happy Birthday BTW!!!!!!!
__________________
SisterHood Of The Rum Creek Gang II~~TGMM~~Comptons
Thomas Poole..Psalm 34:18 "The Lord is near to the brokenhearted and saves the crushed in spirit."

Last edited by TNGIRL; 06-29-2010 at 11:05 AM. Reason: added the pictures when I found them!!!!!
Reply With Quote
  #8  
Old 07-04-2010, 10:18 PM
Toxic's Avatar
Toxic Toxic is offline
 
Join Date: Jul 2008
Location: Cusseta, GA
iTrader: (0) Check/Add Feedback
Default

the "scales" all called scutes, if they come off, soak them in warm faucet water til they are soft, best glue to use is elmers, it dries clear and also won't yellow like super glue. towel dry the scutes , coat with elmers and put into position. when all are replaced and dry. thats when you coat with polyurathane
__________________
If your girlfriend says you never take her some place expensive, take her to a gas station.

Last edited by Toxic; 07-05-2010 at 10:07 AM.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -4. The time now is 05:22 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2004 Georgia Outdoor News, Inc.Ad Management by RedTyger