GON Magazine | GON Marketplace

Go Back   Georgia Outdoor News Forum > Woody's Campfire Talk > Gear Review


Reply
 
Thread Tools Display Modes
  #1  
Old 07-22-2010, 11:23 AM
Jody Hawk Jody Hawk is offline
 
Join Date: Sep 2004
Location: Monroe, Georgia
iTrader: (8) Check/Add Feedback
Thumbs down Poulan chain saw

I was in Home Depot back in December and as I walked in the door, they had Poulan 18" chain saws for $100. Well, I can always use a chain saw around here so I bought one and put it in a spare bedroom until I needed it. Well, several weeks ago I got it out to do some trimming on some of the trees in my yard. I pulled the cord and it stuck and wouldn't retract but the motor cranked so I wrapped the cord around my hand and went ahead and used it. When I stopped it, the cord retracted back in the spool like it was supposed to.

A few days later, I got it out again. The first pull and the cord stuck again. This time, it wouldn't go back in. So I load it up and take it back to Home Depot. They tell me all they can do is send it off for repairs. I'll have to pay $35 which I'll get back if it is under warranty.

So yesterday, I go to pick up my chain saw and they don't want to give me my $35 back. I've already looked at the owners manuel and it is under a 1 year warranty. I'm about ready to turn the place out at this point so this older fellow tells the cashier to go ahead and refund my $35. He then goes on to tell me that Home Depot only warrants their gas powered products for 30 days only.

Well, this morning I get my "fixed" chain saw out again and the first pull it sticks again. I hit it real hard on the side and it retracted. I'm about ready to call Poulan. I've used this saw 3-4 times and it's been nothing but a headache.
Reply With Quote
  #2  
Old 07-22-2010, 11:43 AM
Bitteroot's Avatar
Bitteroot Bitteroot is offline
Polar Bear Moderator
 
Join Date: Feb 2008
Location: ag yellav ragus
iTrader: (0) Check/Add Feedback
Default

you did better than me.... I ripped the handle completely off the saw while cutting..I went and got a real saw after that... plastic handles and chain saws spell trouble. Of course my friend was not to happy about it... but hey, it was his firewood pile!
__________________
Reach fer the sky.......
Reply With Quote
  #3  
Old 07-22-2010, 12:26 PM
Hooty Hoot's Avatar
Hooty Hoot Hooty Hoot is online now
 
Join Date: Jul 2005
Location: Hooterville
iTrader: (1) Check/Add Feedback
Default

Not trying to be a smart aleck but you made two mistakes.

1. You bought a hundred dollar chainsaw

2. You bought it from Home Depot

Home Depot does not warrent the products they sell. I have been burned by them twice. Once for a $2500 refrigerator. Home Depot's philosophy on returned goods is " if it is in good shape, and can be resold, we will give your money back". If it was tore-up when you bought it,
"we just sell this stuff and don't guarantee it". It's kind of funny really. I just don't make any warrantable purchases from them anymore. Oh yea! You could have bought the same saw from Walmart and got your money back.
Reply With Quote
  #4  
Old 07-22-2010, 12:40 PM
Jody Hawk Jody Hawk is offline
 
Join Date: Sep 2004
Location: Monroe, Georgia
iTrader: (8) Check/Add Feedback
Default

Quote:
Originally Posted by Hooty Hoot View Post
You bought a hundred dollar chainsaw
I guess I could have spent more on a saw but I just wanted something to do light trimming work here around the house. Guess you live and learn.
Reply With Quote
  #5  
Old 07-22-2010, 01:44 PM
kaintuckee's Avatar
kaintuckee kaintuckee is offline
 
Join Date: Oct 2007
Location: Over yonder ways
iTrader: (5) Check/Add Feedback
Default

Stihl Farmboss.......
__________________
It's so dry around here....the trees are bribing the dogs
Reply With Quote
  #6  
Old 07-25-2010, 12:49 AM
Foreboy's Avatar
Foreboy Foreboy is offline
 
Join Date: Feb 2008
Location: Snellville
iTrader: (0) Check/Add Feedback
Default

My Stihl 028 woodboss that I purchased used in 1995 still operates great every year after several new bars, plugs, chains.

The $10O Lowe's Husquavra lasted 2 years, or was it 1.5?
Reply With Quote
  #7  
Old 07-25-2010, 09:09 AM
Citiboy287 Citiboy287 is offline
Banned
 
Join Date: Apr 2009
Location: Cumming , GA
iTrader: (0) Check/Add Feedback
Default

I have had one for almost 10 years, Was proberly US made then, I did notice that when ever I bought any replacement parts from the depot, they always wore out fast, I did a complete REBUILD on the Chain, the blade and small screws , spark pulg filters ect about 3 years ago using only direct purchase parts I got from them POLAN and the thing runs fine. They have a major distribution center in Gerogia, might be worth a call.

As a side note My Homelite leaf blower from the depot did the same thing with the cord, when I went to take it back, I got the same story you got, I solved the problem by going to the manager and asking who the rep was from the company that services the store, He gave me the guys number , called him, He gave me 2 options, either they would let it get fixed at a local repair shop to be fixed at their expense or bring it back to the store to be held till he gets through next time. I took the leave it at the store, went back a few days later, brand new one waitting for me in a box----- I never used it but sold it off and purchased a backpack type the next fall

From what I heard there is a small " finger " near the recoil spring that snaps off alot and that causes the issue on lots of recoil stuff

Get in contact with the represenative , you might be suprised

Good Luck
Reply With Quote
  #8  
Old 07-25-2010, 09:26 AM
scottypp's Avatar
scottypp scottypp is offline
 
Join Date: Jan 2008
Location: Macon
iTrader: (15) Check/Add Feedback
Default

it's actually a pretty ez fix, if you pull that side cover off. It's either one of the fingers mentioned above- or the recoil spring is too tight.. i would pull the cover wd 40 the heck out of it.. see how it moves.
Reply With Quote
  #9  
Old 07-25-2010, 09:47 AM
Miguel Cervantes Miguel Cervantes is offline
 
Join Date: Sep 2008
Location: Wadin the Creek
iTrader: (8) Check/Add Feedback
Default

Two rules in life that are tried and true.

#1 - you get what you pay for.

#2 - buy Stihl..

My Stihl is 10 years old, never been tuned up, never used fuel stablizer, and it still cranks and runs like a charm. I have been horrible at taking care of it, but it has never let me down.

By the way, owned a Poulan / Crafstman prior to that. This is when I learned rules #1 & 2.
Reply With Quote
  #10  
Old 07-25-2010, 09:58 AM
LEON MANLEY's Avatar
LEON MANLEY LEON MANLEY is offline
 
Join Date: Mar 2009
Location: eatonton, ga
iTrader: (17) Check/Add Feedback
Default

I hate POULLIN' chain saws.
It takes two people to operate them one to get it cranked and the other can give him a break and run it for a short time till it has to be worked on.
Reply With Quote
  #11  
Old 07-25-2010, 10:07 AM
Jody Hawk Jody Hawk is offline
 
Join Date: Sep 2004
Location: Monroe, Georgia
iTrader: (8) Check/Add Feedback
Default

Quote:
Originally Posted by scottypp View Post
it's actually a pretty ez fix, if you pull that side cover off. It's either one of the fingers mentioned above- or the recoil spring is too tight.. i would pull the cover wd 40 the heck out of it.. see how it moves.
I'm gonna try spraying it real good with WD-40.
Reply With Quote
  #12  
Old 07-25-2010, 10:27 AM
trckdrvr's Avatar
trckdrvr trckdrvr is offline
 
Join Date: Dec 2007
Location: Here today,Gone tomorrow.
iTrader: (3) Check/Add Feedback
Default

Quote:
Originally Posted by LEON MANLEY View Post
I hate POULLIN' chain saws.
It takes two people to operate them one to get it cranked and the other can give him a break and run it for a short time till it has to be worked on.
HaHaHa..Now thats funny.Thx,i needed a good laugh.
Reply With Quote
  #13  
Old 07-25-2010, 02:41 PM
Citiboy287 Citiboy287 is offline
Banned
 
Join Date: Apr 2009
Location: Cumming , GA
iTrader: (0) Check/Add Feedback
Default

WD40 is ok , The best oil I have ever used is KOIL, We had an old car engine had not been started in at least 10 years, Tried once nothing, We took the pulgs our KOIL ed the cylinders and waited 3 hours later it had worked free started rough but runs fine KOIL is the for stuff anything stuck
Reply With Quote
  #14  
Old 07-25-2010, 04:10 PM
hammerz71's Avatar
hammerz71 hammerz71 is offline
 
Join Date: Nov 2008
Location: Cocoa, Fl. / Douglas, GA.
iTrader: (0) Check/Add Feedback
Default

I had a Stihl saw that I bought used from my uncle when he got emphysema and couldn't do any wood cutting anymore. This was prolly a year or two after I got out of high school, so prolly around 1987. Thing ran like a top for years. Had a house in Vidalia with a Buck Stove insert and also had a pot belly stove in my shop out back. The thing got used HEAVY.
Had it stolen out the back of my truck in Florida during the '04 Hurricanes when I went down to cut up some trees that fell or looked like they were about to, on my parents property.

Bought another Stihl, a Farm Boss. Big, heavy, but runs like a top and will cut anything. I no longer have the house in Vidalia so it doesn't get used often, but I keep a little gas with stabilizer in it and will crank it every couple of months just to run and it starts on the second pull every time.

You get what you pay for...
__________________
Conservation is a state of harmony
between men and land. -- Aldo Leopold
Reply With Quote
  #15  
Old 07-25-2010, 04:12 PM
contender*'s Avatar
contender* contender* is offline
 
Join Date: Jul 2006
Location: North of Canton, South of Blue Ridge, East of Dalton and West of Gainesville, Middle of Nowhere.
iTrader: (122) Check/Add Feedback
Default

Buy a Husqvarna and you'll never need another. I've got one that's lasted me 20 years and it will still get the job done.
__________________
Keep standin there with your hand open boy, someone will come along..Member GCO & NRA.... Hirschjäger
Reply With Quote
  #16  
Old 07-25-2010, 05:34 PM
pondman81's Avatar
pondman81 pondman81 is offline
 
Join Date: Feb 2007
Location: ogelthorpe co.
iTrader: (9) Check/Add Feedback
Default

Poulan quality has gone way down I got 1 in 2000 and it still runs trouble free (yes I use it often).However I got 2 Sthil's a 440 and a 026 that are just beasts.
__________________
"Do not touch the trim" Early Cuyler sqidbillies
Reply With Quote
  #17  
Old 07-25-2010, 05:46 PM
The Big Z's Avatar
The Big Z The Big Z is offline
 
Join Date: Oct 2007
Location: Dallas, Ga
iTrader: (1) Check/Add Feedback
Default

I have a Husqvarna 50 rancher 18" blade since 1976. Never had any problems with it. Recently bought a new 455 Rancher 22" blade for the bigger stuff. I've learned to buy quality the first time and never look back.
Reply With Quote
  #18  
Old 07-26-2010, 12:32 PM
Rays123's Avatar
Rays123 Rays123 is offline
 
Join Date: Sep 2008
Location: Ball Ground
iTrader: (2) Check/Add Feedback
Default

I run a lawncare/tree service and I have owned about every brand of saw there is. My advice would be to buy a dolmar or a redmax, yes there foreign brands but there the best saw for the money out right now, I still love my huskys and I use them for all the big stuff but my crappy "stihl wont cranks" just sit in the shop
__________________
Member of the UDS Brotherhood
Reply With Quote
  #19  
Old 08-01-2010, 12:21 AM
Brassman's Avatar
Brassman Brassman is offline
 
Join Date: Jan 2010
Location: Marietta, GA
iTrader: (5) Check/Add Feedback
Default

Sachs Dolmar. 'Nuff said
__________________
NRA Life Member.
Reply With Quote
  #20  
Old 08-01-2010, 12:38 AM
Bamafan4life Bamafan4life is offline
 
Join Date: Jul 2009
Location: Lafayette Georgia
iTrader: (2) Check/Add Feedback
Default

haha, whats funny is i borrowed my brothers today and its only been used once it ran 10 minutes halfway through the pine we where cutting and turned off, the guy who was helpin us knew alot about chainsaws he sharpend it at the right 10 degree angle for the soft wood (something some people dont no) the guys a jet aircraft mechanic he took it and replaced the filter plugs everything you could do to it, and i wouldnt crank. it aint getting no compression. so probly the ring on the motor is wore out. lol i think these would be good for a city boy who may be cutting some brush and trees no bigger than 6'' in diameter.
Reply With Quote
  #21  
Old 08-01-2010, 01:55 AM
Dead Eye Eddy Dead Eye Eddy is offline
Banned
 
Join Date: Apr 2005
Location: Buford, Ga
iTrader: (211) Check/Add Feedback
Default

I've had good luck with Poulan products. Of course, I know how to do my own repair work. I bought a brand new Poulan Wood Shark about 10 years ago at a yard sale. The guy had bought a whole trailer load of returned goods from Kmart. Some idiot had twisted off the chain tension adjust screw while assembling the saw for the first time and taken it back without ever putting any oil or gas in it. I paid $25 for the saw and another $6 for a new chain tension adjust screw. I still use the saw several times a year, and it almost always starts on the second or third pull. I've got two more that I've bought used. I guess I should sell them, because I always grab that first one when I need a chainsaw.
Reply With Quote
  #22  
Old 08-01-2010, 11:48 AM
bulletproof1510's Avatar
bulletproof1510 bulletproof1510 is offline
 
Join Date: Feb 2008
Location: Griffin
iTrader: (15) Check/Add Feedback
Default

I have had (2) Poulan saws since 1996, both have cut a tremendous amount of wood. The smaller one is a 16 inch and the larger 1 is a 20 inch. The smaller has been so much better than the larger one and has been used to cut the same stuff with. I do believe the name brand has suffered some due to them not making saws with metal anymore but as long as mine run, it was definately money well spent.
__________________
Good Times With Good People
Reply With Quote
  #23  
Old 08-01-2010, 11:21 PM
Rays123's Avatar
Rays123 Rays123 is offline
 
Join Date: Sep 2008
Location: Ball Ground
iTrader: (2) Check/Add Feedback
Default

Quote:
Originally Posted by Brassman View Post
Sachs Dolmar. 'Nuff said
agreed, best saw for the money
__________________
Member of the UDS Brotherhood
Reply With Quote
  #24  
Old 08-02-2010, 12:18 PM
FX Jenkins's Avatar
FX Jenkins FX Jenkins is offline
 
Join Date: Oct 2004
Location: NOVA somewhere around Snickersgap
iTrader: (1) Check/Add Feedback
Default

Thats why they are pronounced "Pull-on"
__________________
"A government big enough to give you everything you want, is big enough
to take away everything you have." -Jefferson "I sey, logwood burnin through the nights" -Marley
Reply With Quote
  #25  
Old 08-02-2010, 12:52 PM
JWF III JWF III is offline
 
Join Date: Oct 2009
Location: Mansfield, GA
iTrader: (0) Check/Add Feedback
Default

Poulan used to make good products. (Back when they were the lime green color.)

I was given a new one a few years ago. It lasted only 3 years, of which only one was kind of heavy use. Bar was very soft steel. Lost compression. Have a friend that bought the same model, he's had the same luck.

Traded for a brand new Stihl 390. Now that's a Hoss. Though it's only reccomended to 25" bar; it turns a 28" very well for as little as I need something that big.

Stihl, Husky, Solo, Dolmar, even Makita; all make very good saws.

Wyman
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -4. The time now is 07:40 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2004 Georgia Outdoor News, Inc.Ad Management by RedTyger