GON Magazine | GON Marketplace

Go Back   Georgia Outdoor News Forum > Woody's Campfire Talk > On Topic -- Questions and Answers


Reply
 
Thread Tools Display Modes
  #1  
Old 12-31-2010, 03:46 PM
Bassquatch's Avatar
Bassquatch Bassquatch is offline
 
Join Date: Aug 2007
Location: Colbert
iTrader: (0) Check/Add Feedback
Default Squeaking Floors In A Mobile Home...FIXED

My 'in-law's' floors in their mobile home squeak like crazy. My MIL is just about to go nuts (worse than she already is). They asked me if I knew how to make the squeak go away as they cannot afford any type of contractor to do it. From what I can tell, it seems to be in the same general distance from the outside wall in every room that squeaks....which is MOST of them.

Has anyone here ever dealt with squeaky floors in a mobile home? I've searched online and see a lot of people talking about simply tightening the lag bolts along the steel frame. Is it that easy or is there more to it?
__________________
NRA Life Member
ΜOΛΩΝ ΛΑΒΕ

Last edited by Bassquatch; 01-08-2011 at 05:18 PM.
Reply With Quote
  #2  
Old 12-31-2010, 04:28 PM
Milkman's Avatar
Milkman Milkman is offline
Retired Moderator
 
Join Date: Sep 2004
Location: Confederate State of Georgia
iTrader: (1) Check/Add Feedback
Default

.

It is possible that the squeak could be frame related since it is a mobile home and has a metal frame. But in a stick built home squeaky floors generally are caused by insufficient fasteners on the flooring.
The only real way to do that is pull up the floor covering and add fasteners. If I did this I would use screws (drywall or similar) instead of nails.

It may be worth a try in one room just to see if it helps.
__________________
"There are three kinds of men: The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence themselves.
Reply With Quote
  #3  
Old 12-31-2010, 04:51 PM
burkehunter's Avatar
burkehunter burkehunter is offline
 
Join Date: Nov 2008
Location: Augusta
iTrader: (0) Check/Add Feedback
Default

yeah in my remodeling experience I have found that its going to be because mobile home manufacturers use nails to put subfloor down but the subfloor needs to be screwed down. Use some 2" decking/wood screws to replace the nails.
Reply With Quote
  #4  
Old 12-31-2010, 05:33 PM
Redneck1919's Avatar
Redneck1919 Redneck1919 is offline
 
Join Date: Nov 2009
Location: Henry County
iTrader: (12) Check/Add Feedback
Default

If you can access it from underneath, you can drive door shims between floor and joists, not too tight, just enough to stop squeaks.
If there is carpet in places where it squeaks you can drive two finish nails in at opposing angles through the floor and joists. Bury them deep enough that vacuum won't catch on them or bare feet.
Either method is easier than moving furniture, etc. and pulling carpet, although screws are a better fix.
Jim
__________________
I consider every day I wake up to be a divine gift.
Reply With Quote
  #5  
Old 12-31-2010, 05:39 PM
decoyed decoyed is offline
Banned
 
Join Date: Oct 2010
Location: Fall Line
iTrader: (0) Check/Add Feedback
Default

might be time to scrap her.
Reply With Quote
  #6  
Old 12-31-2010, 06:28 PM
Bassquatch's Avatar
Bassquatch Bassquatch is offline
 
Join Date: Aug 2007
Location: Colbert
iTrader: (0) Check/Add Feedback
Default

Quote:
Originally Posted by decoyed View Post
might be time to scrap her.
The home is only 10 years old.....not sure they're ready to throw it to the curb just yet.
__________________
NRA Life Member
ΜOΛΩΝ ΛΑΒΕ
Reply With Quote
  #7  
Old 12-31-2010, 10:15 PM
Sugar Plum's Avatar
Sugar Plum Sugar Plum is offline
Nurse Shuga
 
Join Date: Dec 2009
Location: Forsyth, GA
iTrader: (0) Check/Add Feedback
Default

Best of luck to you! My stupid A-frame does this and it's killing me. The worst of the squeaks are in the baby's room.

Maybe call a few contractors and ask them what the problem is? You might get one that could give you a general idea
Reply With Quote
  #8  
Old 12-31-2010, 10:18 PM
tshelton99 tshelton99 is offline
Banned
 
Join Date: May 2009
Location: Ga,
iTrader: (3) Check/Add Feedback
Default

I have used the shim with sub-floor glue from underneath trick, works many times under vinyl floors, There is a headless screw I use on carpeted floors, although these screws are hard to find, if you knew the sub-floor was of plywood and not particle board, you can use a size 10d finish nail through the carpet into the joist and set it with a nail set to drive the head on down and then simply rake the carpet pile and you'll never know it, you find it very difficult to drive a size 10d into particle board,
Reply With Quote
  #9  
Old 12-31-2010, 11:26 PM
thomas the redneck's Avatar
thomas the redneck thomas the redneck is offline
 
Join Date: Oct 2010
Location: barnesvile
iTrader: (0) Check/Add Feedback
Default

the only thing i could add would be if you do the shim trick use some liquid nails and try to get some in the crack between the joice and subfloor
and in rare cases the floor will move between the joice's and the noise will come from the wall plate
__________________
just blame it on the dog what ever it was
Reply With Quote
  #10  
Old 01-01-2011, 09:47 AM
skiff23's Avatar
skiff23 skiff23 is offline
 
Join Date: May 2009
Location: Above Augusta ,East of Athens and West of the River
iTrader: (0) Check/Add Feedback
Default

Well here a a few pointers...
1) it is a mobile home , they will have to put up with some.
2) If you can roll back the flooring , try sifting some talc powder down the seems of the wood flooring. You would be surprised !
3) Sheet rock screws WILL NOT hold. They will break if under any pressure. If you can access it use the new torque head screws, they can with stand a lot of pressure.
4) If you go as far as pulling the subfloor , make sure to use subfloor glue. THis is what we use in the business on new flooring along with nails and screws. The glue is what keeps the woods bonded to gether and prevents sqeeks . I have seen a lot of people short change the job and not use it and the result is sqeaky floors and a few dollars saved.

Hope this helps
Reply With Quote
  #11  
Old 01-01-2011, 01:21 PM
jigman29's Avatar
jigman29 jigman29 is offline
 
Join Date: Apr 2009
Location: rabun co.
iTrader: (0) Check/Add Feedback
Default

Easy fix go under the floor and at every pillar they put shims to do the final leveling of the home.In the general area of the squeak take a hammer and tighten up theses wooden shims this should do the trick.Be sure not to drive them to hard or you could make the level of the home get off a little.What happens is that when the home settles some of them get lose and since mobile homes only have 2x6 floor joists they will give when you walk on them.I had the same problem in my mom's home and the guy who moved the home told me to try this and it worked fine.
Reply With Quote
  #12  
Old 01-02-2011, 08:24 AM
bobcat's Avatar
bobcat bobcat is offline
 
Join Date: Sep 2004
Location: White Heath Illinois ! Ga boy always !!
iTrader: (0) Check/Add Feedback
Default

Very simple fix for 90 percent of it. Get someone to make the floor squeak and take a hammer and go underneath and find the LAG bolts that are squeaking. Hit the lag heads at an angle until they stop squeaking. Use to do service on mobile homes and this gets the majority of all squeaks fixed. If had to guess the squeak is about 4 ft of exterior walls. If have any other squeaks like loose decking u can drive an 8 penny finish nail through the carpet if its not feasible to pull carpet up. But my bet is on lag bolts on frame.
__________________
Early to bed ,Early to rise , Hunt all day, And make up lies ,
Reply With Quote
  #13  
Old 01-02-2011, 09:44 AM
Misfire270's Avatar
Misfire270 Misfire270 is offline
 
Join Date: Dec 2005
Location: Foothills
iTrader: (1) Check/Add Feedback
Default

squeeks same distance from walls are probobly the air ducts they are usually strapped so tight they squeek against the joists you can try to loosen them up (a major pain) or find thespots andplace something between the duct and joist i put scrap carpet pad on many to stop thesqueeks
__________________
If it's worth doing do it right the first time: My grandfather
Reply With Quote
  #14  
Old 01-08-2011, 05:21 PM
Bassquatch's Avatar
Bassquatch Bassquatch is offline
 
Join Date: Aug 2007
Location: Colbert
iTrader: (0) Check/Add Feedback
Default

So today was the day. I had to go under it anyway to run cable for an additional TV. While I was under there, I located the lag bolts along the frame. I took a 1/2" socket/ratchet and went along tightening the bolts. Most turned about 1/2 to 1/4 turn, while some took 1 or 2 whole turns. I even found a few that would not tighten at all...just stripped out. Anyway, the floor no longer squeaks. Everyone is happy.
__________________
NRA Life Member
ΜOΛΩΝ ΛΑΒΕ
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -4. The time now is 06:43 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright 2004 Georgia Outdoor News, Inc.Ad Management by RedTyger