Hey guys. I'm about to pull my hair out on trying to sight this thing in. I'm shooting a Hoyt Defiant with a CBE TEK Hybrid Pro sight. I've looked up videos and called a local bow shop with no luck. I've got my 30yd and 60yd "marked" and picked out a #7 metal plate that it comes with. However the 30yds and 60 on my mark doesn't match up with the metal plate. I'm confused on how to adjust it... Idk if this explains it well. But any help would be helpful! I'm located in Watkinsville too. If you're close and wanna come help!
Welcome Guest!
CBE TEK Hybrid Pro sight. HELP!
- Thread starter biged156
- Start date
alligood729
Senior Member
I didn't see this thread and answered on the other one. If you bought the sight new, there should be plenty of sight plates to choose from. Kris lives over that way, maybe he will see this.
Kris87
Senior Member
Take a picture of how u marked your 30 and 60 ticks.
Kris87
Senior Member
I'll help but pics would be best.
kbuck1
Senior Member
I think he is saying he has the right tape to match the marks he made. He can't get the tape in position to line up with the marks he made. Not familiar with that sight but hha sight you can loosen the dial and turn it till it corresponds with the pointer location
Similar threads
