what grit sand paper for crystal pot call???

[cstinchcomb]

Just ordered a crystal mistress and was wondering what grit I should use to condition the surface.. all I've had til now is a slate call.

 

[cmriner]

I prefer 120 . One of my son's calls came with 80 and it was to coarse my liking.

 

[turkeyhunter835]

I use 100

 

[turkeyhunter835]

Correction i have 220 in my vest

 

[OneBadDawg]

I find 220 to be too fine and I end up slipping after a while. I'm going to experiment with 140 but I'm no expert, just my 2 cents

 

[Jellyhead Joe]

This trick works for me.Give fifteen swipes with 80 grit, all going from left to right. Then make around thirty swipes with 120 grit going top to bottom. This will give you a cross hatching pattern on the call.

 

[returntoarchery]

This trick works for me.Give fifteen swipes with 80 grit, all going from left to right. Then make around thirty swipes with 120 grit going top to bottom. This will give you a cross hatching pattern on the call.

I'll give that a try. Might help my crystal. I've had a devil of a time getting the surface to run consistently.

 

[sasmojoe]

I use Sheetrock screening, you find it at Lowe's