11th Edition Hornady

Jester896

Senior Clown
Does anyone have an 11th edition manual. I need data for .30-06 150gr Interlock or SST and Superformance.
 

Jester896

Senior Clown
I looked at the Hodgdon data and felt the same way... but wanted to check Hornady info so I emailed them. All they would tell me was it was in the 11th edition.

Funny... when they first came out I tried to get that and the new Nosler....I finally found the Nosler in stock somewhere. Now everyone has them it seems and I just placed 2 orders at places that have them.
 

BriarPatch99

Senior Member
Do you have a few of both bullets .... if so take your caliper and set it to .308 ...scribe a line where the ogive meets the .308 ...do the same for the boat tail ...measure the "bearing surface of each and compare .... the SST is longer by .002" in total length or so ....but I don't have either to measure the bearing surface .... other than that they would be comparable in build ...
 

JeffinPTC

Senior Member
Nosler and Speer have FREE data. It bothers me that Hornady, Sierra, etc want you to pay for the instructions for using their product that you just paid $40 for.

https://www.nosler.com/30-06-springfield

Scroll down the left side to find 30-06 here:

https://www.speer.com/reloading/rifle-data.html



Speer and Nosler also seem to have more data for newer powders.

Mr. Lee in his second edition of Modern Reloading hardly even mentions manufacturer in his data, arranging data mostly by bullet weight. From 2003 though, and no newer powders.

And as more experienced than me have said, work up...

cropped.jpg
 
Top