Going with BH 209....

I will be switching from 777 pellets to BH 209 powder soon. What accessories do you guys recommend for powder flask, measure, quick-loaders, etc? Thanks in advance.
Beware... I had my quick loads loaded with pellets and had cotton on the other end for support. Two of my quick loader's pellets where broken up...

alib,

you need a lil red funnel cap that clips on top of the powder can. most BP stores will have them.

I use is a TC ezview for pre-measuring loads like this one...although it can be found cheaper


http://www.basspro.com/webapp/wcs/s..._18442_425010005_425000000_425010000_425-10-5

then I go ahead and make up a whole bunch of these for in the field and at the range. when loaded with 100 grains of powder and a 250 grain bullet mine looks like the third from the left. order a bunch cause they are cheap. use a number 2 pencil and a dryer sheet inside before loading to get the static cling out



they can be ordered from Lane here http://thepowerbeltforum.powerguild.net/lanes-powder-tubes-f6/lane-s-powder-tubes-t395.htm

thanks JT...