doomtrpr_z71
Senior Member
What's the odds I turn this over, it's over 6ft tall and 76in wide and powered by a 318 v8.
Welcome Guest!
Too much tractor?
- Thread starter doomtrpr_z71
- Start date
NE GA Pappy
Mr. Pappy
just a suggestion, but you do know that a 360 Hemi will bolt right in there, right? there is no such thing as too much HP on a tractor.
doomtrpr_z71
Senior Member
If I do a swap, it would be a LS1. This is the one I have on the way instead of that one so I can spray with it.
Canuck5
Food Plot advisor extraordinaire !
Oh Man! I think I saw one of those in a Star Wars movie!!!! 
Crakajak
Daily Driveler News Team
What's the odds I turn this over, it's over 6ft tall and 76in wide and powered by a 318 v8.
Tweak that motor/A little sheet metal and your good to go mud bogging. You wouldn't even get muddy.
rospaw
Senior Member
Mobile hunting blind??? 
Put a camo skirt around it with a nice slit....... get under the skirt and ............ HUNT!
P.s. i bet parts for that high rider are HIGH!
Put a camo skirt around it with a nice slit....... get under the skirt and ............ HUNT!
P.s. i bet parts for that high rider are HIGH!
cjones
Senior Member
You couldn't pay me enough to spray with an open cab sprayer.
Signed,
Former TerraGator 8103 and RoGator 874 operator
Signed,
Former TerraGator 8103 and RoGator 874 operator
doomtrpr_z71
Senior Member
Parts are cheap, the drive is a Cessna pump and the wheel motors are off the shelf. Most of the spraying will be done with a spracoupe I build a multiboom for, some will be done with the hagie since it's front boomed. It's a bit slow so spraying with it is not as bad.
Crakajak
Daily Driveler News Team
Get you one of those excersize plastic suits with a face mask.Tape up all the joints with duck tape and you will be fine.Expesially in a clearcut in August.
doomtrpr_z71
Senior Member
That's a great way to loose weight
Similar threads
