Did you reload anything today #4

[Jester896]

I have a Redding T-7 but I don't use it much if any. I even have an RCBS case activated powder measure for it and I think all of the pieces are still there I know I have the box. I saw them somewhere the other day for $357 and extra tops were $99.

At one of the Rifle Expos we looked at the RCBS Summit press and RCBS gave us some of the .243 loads we watch them load to check the run out...it was better than they claimed.

 

[Dub]

I have a Redding T-7 but I don't use it much if any. I even have an RCBS case activated powder measure for it and I think all of the pieces are still there I know I have the box. I saw them somewhere the other day for $357 and extra tops were $99.

At one of the Rifle Expos we looked at the RCBS Summit press and RCBS gave us some of the .243 loads we watch them load to check the run out...it was better than they claimed.

That reminds me…..you seen the Summit press they are making finished out in their “Freedom Camo”?

 

[Jester896]

Something else to think about if you decided to get the Co-Ax press. It would be a good idea to change all of your lock rings to the ones they recommend. Minor adjustments are a breeze with them if needed and they will not damage the press.

 

[Liberty]

I used my last precious H4895 for my boy’s next few years 152 grain copper .308 hunting rounds. It’s been a few years since seeing any in the wild. 40 rounds decided by 3 sighters and 2 deer a year...hopefully some shows up before 2032. If not, I bet those Power Points will kill them as dead as they did in the 1960’s and in 2023.

 

[Jester896]

I used my last precious H4895 for my boy’s next few years 152 grain copper .308 hunting rounds.

I've seen some in a warehouse over here somewhere. you might be able to pry a # out. next time I am by there I will look to see

 

[Adam5]

I’m starting to prep another 700 9mm. That should keep my in 9mm through midsummer.

 

[Adam5]

700 sized and decapped. About to start belling.

 

[Jester896]

slow poke...must have stopped to eat lunch

 

[Adam5]

slow poke...must have stopped to eat lunch

I got the first 600 belled. I think that’s about my limit for a day with the hand press. Also, clients kept calling and interrupting me. They should know not to call me while I’m busy prepping grass.

 

[earlthegoat2]

Loaded 5 whole rounds of 454 Casull.

36gr H110 over a 240 gr XTP-Mag.

 

[deerslayer357]

Trimmed, chamfered/deburred, and Loaded 10 rounds of 6.5 MB, trimmed and chamfered another 10 to load later this week.

 

[rosewood]

Sorted a snack container full of 45 acp brass and tumbled, then stored for loading in the coming weeks. Separated out the crimped primer WRA brass and the WCC match brass. Going to try out some Missouri Bullets 230gr Hi-tek coated with VV310. My brother ordered the wrong boolits, was suppose to order the 200 grain semi-wadcutter with crimp grove for 45 colt. Oh well, we going to use these too.

Got about 3 lbs of VV310 in a trade and have never used it. Hope it makes a good accuracy target load.

Rosewood

 

[rosewood]

Loaded 5 whole rounds of 454 Casull.

36gr H110 over a 240 gr XTP-Mag.

Gonna need sunglasses when you light those off......

 

[rosewood]

I got the first 600 belled. I think that’s about my limit for a day with the hand press. Also, clients kept calling and interrupting me. They should know not to call me while I’m busy prepping grass.

I don't know how you guys do it. I don't have the patience for that. I size, bell, crimp, seat, and crimp on every pull of the 550B.

Rosewood

 

[Jester896]

I don't know how you guys do it. I don't have the patience for that. I size, bell, crimp, seat, and crimp on every pull of the 550B.

Rosewood

I would run that on my T-7 or the 1050 we have set up for processing. On the Dillon it wouldn't even get belled since the powder drop does it when loading.

 

[rosewood]

On the Dillon it wouldn't even get belled since the powder drop does it when loading.

Exactly, bell and powder drop is one step.

The 550b was my first press, so it got me spoiled.

 

[earlthegoat2]

Gonna need sunglasses when you light those off......

28” barrel.

Might not even need ear pro with that long of a pipe.

 

[rosewood]

28” barrel.

Might not even need ear pro with that long of a pipe.

View attachment 1295121

That is a good point, I didn't realize that was what you would be shooting in.

 

[Adam5]

Primed and ready. They will get 115gr Xtreme target hollow points over 6.2gr of HS6 soon.

 

[Adam5]

We loaded the 700 9mm cases that I prepped the other day. This gives my 1,000 of my favorite match load in an ammo can. I’m going to prep another 250 or 300 tomorrow to fill the can.

Xtreme 115gr target hollow points over 6.2gr of HS-6.