Sardines in a can
Welcome Guest!
What did you do today that’s related to deer hunting #5
- Thread starter Milkman
- Start date
WishboneW
Senior Member
Order on line from Agrisupply
slow motion
Senior Member
Pork chops on the hoof.
I have bought some before at farm equipment auctions but now I do as Wishbone suggests.
slow motion
Senior Member
I need some too for a cultivator. Wondering about tractor supply.
Never seen any there.
This is what my AP uses. Don’t forget to get new bolts and nuts if needed.
Chisel Plow Point, 11 In. L x 2 In. W x 5/16 In. T
This chisel plow point will help you break through hard soils. The point is 11 inches long, 2 inches wide and 5/16 in. thick.
www.agrisupply.com
WishboneW
Senior Member
Always have to cut the bolts off on mine.Never seen any there.
This is what my AP uses. Don’t forget to get new bolts and nuts if needed.
Chisel Plow Point, 11 In. L x 2 In. W x 5/16 In. T
This chisel plow point will help you break through hard soils. The point is 11 inches long, 2 inches wide and 5/16 in. thick.
I love air tools!
I was surprised yesterday that I was able to reuse all 14 bolts and 28 nuts.
I use long enough bolts to allow double nuts that completely protect all threads.
WishboneW
Senior Member
I do that too. My problem is I wait too long to rotate / change and wear the threads and sometimes the nuts
slow motion
Senior Member
Good tip about the bolts.Never seen any there.
This is what my AP uses. Don’t forget to get new bolts and nuts if needed.
Chisel Plow Point, 11 In. L x 2 In. W x 5/16 In. T
This chisel plow point will help you break through hard soils. The point is 11 inches long, 2 inches wide and 5/16 in. thick.
IMO When the plow points start getting round vs pointed it’s time to reverse or replace them.
fishfryer
frying fish driveler
Good idea, a wire brush and wd-40 helps too
Mines like that now. Guess I'll have to put the die grinder to work.
Mines worn to the tines. Don't know why nobody ever reversed them.
Gbr5pb
Senior Member
Went to the Home Depot and got enough to finish grandsons box stand. Made a couple keys and then Tractor supply for a bucket of rat killer for camp renewed my drivers license and voted while out
Received some broadleaf herbicide for food plot.
slow motion
Senior Member
Sent a few arrows down range.
ditchdoc24
Senior Member
Got my hog trap re-baited and reset yesterday afternoon. Finally done with class and headed back to work today. I feel like doing some work today but I'm not sure the weather is going to cooperate all that much.
Shadow11
Senior Member
Well, i went to town to get some groceries and things at 6-630am. While at the walmart in Cornelia, I swung by the deer section. I thought I might pick up some deer minerals or food while I'm in there. Unfortunately, they lock it all up now. Also, they aren't selling corn anymore.
The local hardware store and the feed and seed store doesn't open til 730. Tractor supply is even worse.... 8am. Lowes opens at 6, so I picked up some lumber, but they don't sell deer anything.
It gets daylight at 6am ppl! Get with the program! Lol. I didn't do anything...
The local hardware store and the feed and seed store doesn't open til 730. Tractor supply is even worse.... 8am. Lowes opens at 6, so I picked up some lumber, but they don't sell deer anything.
It gets daylight at 6am ppl! Get with the program! Lol. I didn't do anything...
Similar threads
