WishboneW
Senior Member
Ruger M77 MKII compact, stainless, laminated stock .308 caliber.
@10 yards the point of impact is 2 feet low with all the elevation adjustment in. Windage is perfect.
Have owned the rifle since new in 2004. Has had 2 scopes, Zeiss conquest 3 x 9 50 mm and currently a Burris signature 3 x 9 40 mm.
The Zeiss was installed on the rifle when I purchased it and stayed on undisturbed until this summer.. I have shot this rifle a lot with this scope up until last year. I shot it and it was on target, put it up in the safe where it stayed undisturbed and this summer it shot low first off. Sent the scope to Zeiss and they sent me a new one. OK, but I did not like it. Put the Burris on after checking to ensure rings were secure and the action still tight on the stock. The action was removed and reinstalled once in 2005.
There are no nicks on the crown. I have probably put 700 rounds down the tube of this gun with no issues.
Looking for some suggestions on what to check.
@10 yards the point of impact is 2 feet low with all the elevation adjustment in. Windage is perfect.
Have owned the rifle since new in 2004. Has had 2 scopes, Zeiss conquest 3 x 9 50 mm and currently a Burris signature 3 x 9 40 mm.
The Zeiss was installed on the rifle when I purchased it and stayed on undisturbed until this summer.. I have shot this rifle a lot with this scope up until last year. I shot it and it was on target, put it up in the safe where it stayed undisturbed and this summer it shot low first off. Sent the scope to Zeiss and they sent me a new one. OK, but I did not like it. Put the Burris on after checking to ensure rings were secure and the action still tight on the stock. The action was removed and reinstalled once in 2005.
There are no nicks on the crown. I have probably put 700 rounds down the tube of this gun with no issues.
Looking for some suggestions on what to check.