GT-40 GUY
Gone But Not Forgotten
In case you are interested in mounting your scope that has a 50mm objective here are some pictures. Note that I will have to grind the top of the B-Square level because the scope touches it when tightened down.
I installed a EGW 20 MOA Picatinney rail then you can see the different hight of the rings. The first are 1" high then 1/2" high and the ones I am keeping are 1/4" high. The last picture is the scope with 1" high rings.
The 1/2" and 1/4" are Burris Extreme 30mm Tactical Rings. I hope this will help you when deciding the ones you want with 30mm rings.
Please note that if your scope tube is 1" the objective "may" touch the barrel.(?)
"Aim small miss small",
gt40
PS: The first picture has 1" high ring and a 1/2" high next to it for comparison. The ones I am keeping are 1/4". The 4th. picture down are the 1/2" with the scope. The 5th. picture is with the 1/4" rings.
I installed a EGW 20 MOA Picatinney rail then you can see the different hight of the rings. The first are 1" high then 1/2" high and the ones I am keeping are 1/4" high. The last picture is the scope with 1" high rings.
The 1/2" and 1/4" are Burris Extreme 30mm Tactical Rings. I hope this will help you when deciding the ones you want with 30mm rings.
Please note that if your scope tube is 1" the objective "may" touch the barrel.(?)
"Aim small miss small",
gt40
PS: The first picture has 1" high ring and a 1/2" high next to it for comparison. The ones I am keeping are 1/4". The 4th. picture down are the 1/2" with the scope. The 5th. picture is with the 1/4" rings.
Attachments
Last edited:
