Can you recommend a website to help me tie into an existing roof to extend it?It's a little tight on this side of the chimney. Decided against the wallboard and ran the siding off ladders.
View attachment 993451
Can you recommend a website to help me tie into an existing roof to extend it?
I'd have to have my boy do it,,,,just want to extend about 8 ft,,,,2 6x6 posts at the end,,,,open, not framed in,,,,As far as framing or the whole shootin' match?
For framing the Larry Haun videos are good.
If you haven't done that type of work I would recommend finding someone who has.
I'd have to have my boy do it,,,,just want to extend about 8 ft,,,,2 6x6 posts at the end,,,,open, not framed in,,,,
Yep,,,,I've got the tools,,,,just never tied into an existing roof,,,,Just a shed roof?
Yep,,,,I've got the tools,,,,just never tied into an existing roof,,,,
I know whatcha' mean.
The end of the ridge on the left is 40' to the ground. I was happy to be finished with that part!
Yep,,,,Like this?View attachment 993458
Yes sir. 2x4 toeboards and screwed every sheet as we went and then shimmied out there and screwed on the ridge cap. It makes you tighten up a little bitMy back screened porch will be metal roof on a 12/12. I'll be working off of purlins(no decking) so I don't mind.
How did y'all walk on the metal? Toe boards off to the side?
Yes sir. 2x4 toeboards and screwed every sheet as we went and then shimmied out there and screwed on the ridge cap. It makes you tighten up a little bit
Nice,,,,Shed roof for CMP1. Off a gable wall instead of a roof though.
I don't mind walking on metal on a 1/12 pitch.View attachment 993462
Nice,,,,