doomtrpr_z71
Senior Member
I wasn't paying hazmat and shipping on 1kYeah I missed those..
I wasn't paying hazmat and shipping on 1kYeah I missed those..
Midway has 5000 count cases available nowYeah I missed those..
NopeMidway has 5000 count cases available now
Way too slow thenView attachment 1063078
Midway has a couple right now, three left. https://www.midwayusa.com/product/1011201072I didn't even get a notification.
I did on some 9mm dies recently. I opened the email within an hour of receiving it and they were gone.
I want a second set for load development using a single stage press.
Midway has a couple right now, three left. https://www.midwayusa.com/product/1011201072
http://www.bigcountrysportinggoods.com/lee-precision-lee-4-die-set-9mm-carbide-e90963/Too Late again. Other than your heads up no notification either.
I've been in the dungeon cleaning, installing springs, tinkering with a few big boys and girls toys this morning.
Thanks
https://www.titanreloading.com/Hornady-Custom-Grade-9mm-Luger-Nitride-3Die-SetToo Late again. Other than your heads up no notification either.
I've been in the dungeon cleaning, installing springs, tinkering with a few big boys and girls toys this morning.
Thanks
I’ve got a decent stockpile so not dead in the water, but would like some small pistol magnum. Have some small pistol, BR2, 400s and 450s I would trade. I learned on here that 400s are the same as SPM.Did you find you some primers?
If not I may have some that I would trade
You stand a good chance of blowing a revolver up with them due to height.Just for the sake of expanding the discussion, what about large rifle primers in bigger bore pistols like the 45LC? Not talking magnums but something like CCI 200's, still loads for suitable pistols and/or rifles.
Hey @BriarPatch99 , any advice on whether BR2 will work in place of LRMs? I accidentally bought another 7 mag today and have brass, bullets, and ok powder (4350)... but no large rifle magnum primers. I hear BR2 is great in 7 mag but never tried it.
I have used CCI large rifle in my 7 mag with good success. Richard Lee in modern Reloading II has recipes for a wide variety of calibers and bullet weights without magnum primersHey @BriarPatch99 , any advice on whether BR2 will work in place of LRMs? I accidentally bought another 7 mag today and have brass, bullets, and ok powder (4350)... but no large rifle magnum primers. I hear BR2 is great in 7 mag but never tried it.
I have never used a LRM in my life. I have only ever used Winchester and Federal LR primers in 7mag and 300 mag and have always been fine. I think I may have even used CCI LR at one time, but haven't in years. Maybe I should, I don't know.Hey @BriarPatch99 , any advice on whether BR2 will work in place of LRMs? I accidentally bought another 7 mag today and have brass, bullets, and ok powder (4350)... but no large rifle magnum primers. I hear BR2 is great in 7 mag but never tried it.