GeorgiaGlockMan
Senior Member
I use a big buddy and lil buddy heaters in all of my enclosed blinds.Do not put a portable heater in a blind.
As long as you have a window or 2 open per the instructions you are good. I think the rule of thumb is 4 sq inches per 1,000 btu. Cross-flow is better. They only have to run a minute or 5 every 1/2 hr or so to keep it toasty.
Eta - copied from big buddy manual w.r.t ventilation...
****,This heater requires a vent area
of 18 square inches (example
4.25” x 4.25” opening) minimum
for adequate ventilation during
operation. Do not use other fuel
burning appliances inside.***
Last edited: